FERM FIX PU FOAM

FERMFIX POLYURETHANE FOAM is ​​a single-component, multi-purpose product that is available in two types of injection, straw and gun. This foam cures in the presence of moisture and is used to fill cracks and joints in construction, cracks and holes and insulation.

  • Sound and thermal insulation
  • Resistant to every kind of weather conditions, seawater, steam and moisture.
  • Ability to cut, paint, plaster and sand after hardening
  • Has antibacterial properties and is resistant to decay
  • Possibility of covering with plaster
  • Made in Turkey under the license of the Netherlands
  • Not easy flammable

 

SHELF LIFE AND STORAGE

  • 12 months after production date if stored at room temperature.
  • Store at temperature between 0ºC and +30ºC.

 

 

 

APPLICATION INSTRUCTIONS

  • Fixing doors, windows and similar frames.
  • Using in insulation of hot and cold-water pipes and electrical equipment.
  • Filling up the gaps, holes and cracks.
  • Bonding to all kinds of building materials except silicone, Teflon, polyethylene and polypropylene.
  • Insulation of electrical equipment
    • Application temperature is between +0 °C to +35 °C.
    • Shake the can strongly for 30 seconds.
    • Twist and install specialized dosage trigger on the can.
    • Remove the dirt, dust and grease from the application place.
    • Turn the can upside down and press the trigger.
    • Moisturising the ground and released foam is strongly advised.
    • Moisturising accelerates reaction and ensures a productive result.
    • For later applications, dried foam residue should be removed from the pipe and valve.
    • Fresh foam residue can be cleaned by using SOMAFIX PU FOAM CLEANER.
    • Cured Foam can be cleaned mechanically.
    • Since foam tenders to expand, proper quantities should be used.
    • Can be shaved, sandpapered and painted after it get hardens in 1 or 3 hours.

Moisture Curing System
8-10 minutes Skin Forming Time
45-60 minutes Cutting Time
19 % Ultimate Elongation
3 N/cm³ Tensile Strength
15-18 kg/m³ Density
-40ºC to +100ºC Thermal Resistance
18 lt/30 lt/50 lt Yield (300ml/500ml/750ml)
60-70 % Closed Cell Content
25-30 mW/m.K Thermal Conductivity
0ºC/+35ºC Application Temperature
0ºC/+30ºC Storage Temperature

 

  • Canister 700 ml - Package  12 pcs/ctn
  • Canister 325gr - Package  12 pcs/ctn
  • Canister 850gr(GUN) - Package  12 pcs/ctn