FERMFIX AQUARIUM SILICONE is one component acid-curing silicone sealant with excellent mechanical properties and primer less adhesion to most non-porous siliceous material. It cures at room temperature under the action of atmospheric moisture to give a permanently flexible silicone rubber.

  • High curing rate for construction of aquariums and industrial applications
  • Non-sag
  • Special high-viscosity paste
  • Easy gunnability
  • Quickly becomes tack-free
  • Low shrinkage during vulcanization
  • Good tooling properties
  • Flexible at low (- 40ºC) and high temperatures. (+180ºC)

 

SHELF LIFE AND STORAGE:

  • 18 months after production date if stored at room temperature.
  • Store at temperature between +0ºC and +35ºC in dry place.

  • Sealing of joints exposed to high mechanical loads.
  • Sealing of joints which need to quickly build up mechanical strength.
  • Suitable for the construction of aquariums which meet the requirements of DIN 32622.
  • Suitable for use in glazing.

 

Usage Instruction:

  1. Application temperature must be between +5 °C to +40 °C
  2. Make sure the surface to be applied is dry and clean, free of dust and grease.
  3. Cut the cartridge tip and place it in the gun
  4. Apply the silicone over the surface in strip form.
  5. The bond thickness must be at least 1 mm.
  6. Clean any silicone residue simply with soapy water.
  7. During curing the temperature should be between +5ºC and +40ºC.

Acetoxy Curing System
250ml/min Extrusion Rate
20 min Skin Forming Time
3 mm/day Curing Rate
250 % Ultimate Elongation
0.60 N/mm² Tensile Strength
20 Hardness Shore A
1.03 g/cm³ Density  
-40 °C to +180 °C Thermal Resistance
0.35 N/mm² Modulus at 100 % Elongation
4.2 N/mm Tear Strength
1.6 N/ mm² Combined Tension & Shear Resistance
+5ºC/+40ºC Application Temperature
+0ºC/+35ºC Storage Temperature

 

  • Cartridge 280 ml(320gr) - Package  24 pcs/ctn