FERMFIX HOT MELT GLUE

FERMFIX HOTMELT GLUE STICK is a slow setting, high viscosity, general purpose adhesive
 

  • Bonds through dirty or oily surfaces
  • Odourless
  • High bond strength
  • Easy to use
  • No clean up requires
  • Environmentally friendly

 

Shelf Life and Storage:

Store in a well-ventilated place. Keep cool.


 

  • Using for bonding metals, leather, ceramic, porcelain, most plastics, hard and soft woods, paper, cardboard, fabric and masonry
  • Ideal for DIY tasks, household repairs, craft and hobby works
  • Not suitable for applications in direct contact with soft PVC, PE and PS


Application Instructions

  1. Plug in the glue gun
  2. Load the glue stick into the back of the gun
  3. Press trigger several times until the glue stick is firmly set into the inlet tube
  4. Allow the glue gun warm up for approximately 5-7 minutes
  5. Trigger the adhesive stick until glue flows from the nozzle
  6. Do not spread the glue over the surface
  7. Press surfaces together right after the application
  8. Unplug the glue gun when finished


 

Chemical Basis Ethylene vinyl acetate
Appearance Stick
Colour Clear,Translucent
Odour Characteristic
Density 1.05 g/cm³
Softening point 86 °C ±3
Application Temperature -20 to +35°C

 

  •  Package 1kg , 20 pcs/ctn