Contact cleaner spray is an industrial spray used to clean electronic parts. This product is available in two types, oily and dry.

Dry contact cleaner spray cleans dirt, sulfate, rust and grease from metal and plastic surfaces in electronic equipment. This spray contains volatile and solvent substances that dissolve the pollution in itself and then disappear or vapor in the term. It should be noted that although the dry contact cleaning spray consists of volatile substances, be careful to allow time for IC and other electronic components to completely remove the substances from the surface. Contact cleaner products increase the electrical conductivity of the parts and prevent the device from waste electricity and do not damage the electrical circuit.

 

  • High cleaning power
  • Without any residual from itself
  • Increase the electrical conductivity
  • Penetrability and easy use for surfaces with limited access

Shelf life and storage:

  • Storage temperature: 27°C
  • 36 months after product

 

  • Cleaning the circuit, capacitor, transistor
  • Cleaner for sensitive plastic parts, switches, relays, electronic board capacitors and contacts
  • Degreasing phone buttons, magnetic heads and sensors
  • Cleaner of hardened deposits and fats on the ribbon of printer devices
  • Remover of soldering grease residues and oily substances that prevent the operation of motors and sensitive electronic equipment.

Method of Use:

Turn off the electricity and allow the hot surface to cool. Make sure all stored power is removed from the system. Shake the can well and hold it at a distance of 15 to 20 cm from the surface and spray. Tilt the surface while cleaning and allow any excess cleaner to drain. Allow the product to dry and completely drain the system before restoring electricity.

 

  • Spray 300mil, Package 24 pcs/box